Multi-Tech Systems E1 User Manual
Page 125
MultiVOIP User Guide
Technical Configuration
125
The Regional Parameters screen will appear. For the country selected,
the standard set of frequency pairs will be listed for dial tone, busy
tone, ‘unobtainable’ tone (fast busy or trunk busy), ring tone, and
other, more specialized tones.
Remote Configuration/Command Modem.
Each MVP2410 and
MVP3010 MultiVOIP unit contains a built-in modem. This modem
allows the MultiVOIP to be configured remotely when a standard
POTS line is connected to the “Command Modem” connector on the
back panel of the MultiVOIP. In the Country Selection for Built-In
Modem field (drop-down list), select the country that best fits your
situation. This may not be the same as your selection for the
Country/Region field. The selections in the Country Selection for
Built-In Modem field entail more detailed groupings of telephony
parameters than do the Country/Region values.
In each field, enter the values that fit your particular system.