Multi-Tech Systems E1 - Manual (Page 231)

MultiVOIP User Guide E1 PhoneBook Configuration
231
Remember that the initial MultiVOIP setup must be done locally or via
the built-in Remote Configuration/Command Modem using the
MultiVOIP program. However, after the initial configuration is
complete, all of the MultiVOIP units in the VOIP system can be
configured, re-configured, and updated from one location using the
MultiVOIP web GUI software program or the MultiVOIP program (in
conjunction with the built-in modem).
E1 Phonebook Examples
To demonstrate how Outbound and Inbound PhoneBook entries work
in an international VOIP system, we will re-visit our previous example
in greater detail. It’s an international company with offices in London,
Paris, and Amsterdam. In each office, a MVP3010 has been connected
to the PBX system.
3 Sites, All-E1 Example
The VOIP system will have the following features:
1. Employees in all cities will be able
to call each other over the VOIP
system using 4-digit extensions.
2. Calls to Outer London and Inner
London, greater Amsterdam, and
greater Paris will be accessible to all
company offices as local calls.
3. Vendors in Guildford, Lyon, and
Rotterdam can be contacted as
national calls by all company offices.
Note that the phonebook entries for Series II analog MultiVOIPs (MVP-
210/410/810) used in Euro-type telephony settings will be the same in
format as entries for the MVP3010.