Multi-Tech Systems MULTIVOIP MVP-410ST/810ST User Manual
Page 225
MultiVOIP User Guide
Technical Configuration (Analog/BRI)
225
IP Parameter Definitions (cont’d)
Field Name
Values
Description
FTP Parameter fields
FTP Server
Enable
Y/N
Default = disabled
See “FTP Server
File Transfers” in
Operation &
Maintenance
chapter.
MultiVOIP unit has an
FTP Server function so
that firmware and other
important operating
software files can be
transferred to the voip
via the network.
TSM Routing Option Parameter
fields
Use TDM
Routing for
Intra-Gateway
calls
Y/N;
enabled by
default
Allows calls placed
between ports on the
same MultiVOIP voice
channel board to be
routed over internal
Time Division
Multiplex bus without
conversion to IP. TDM
routing effectively
eliminates the delay
introduced by IP
conversion.
If you require all calls
to be IP routed,
disable the “use TDM
Routing for Intra-
Gateway Calls”
option. Since this is
not normally required,
we generally
recommend leaving
TDM Routing enabled.
Not applicable to MVP-
130/130FXS.