Multi-Tech Systems MULTIVOIP MVP-410ST/810ST - Manual (Page 102)

Mechanical Installation & Cabling MultiVOIP User Guide
102
Network Mode . When a voip ISDN connector is to be connected to an
ISDN phone station or to an ISDN terminal adapter (TA), select
“Network” as the “Layer 1 Interface” in the ISDN Parameters screen
of the MultiVOIP software. Connect cables between voip ISDN
connectors and phone or TA.
NOTE. Any ISDN phone stations connected to the MVP-
410ST/810ST must provide their own operating
power. That is, the MVP-410ST/810ST does not
supply power for ISDN phone stations.