Multi-Tech Systems MULTIVOIP MVP-410ST/810ST - Manual (Page 117)

MultiVOIP User Guide Software Installation
117
8. A completion screen will appear.
Click Finish .
9. When setup of the MultiVOIP software is complete, you will be
prompted to run the MultiVOIP software to configure the VOIP.
Software installation is complete at this point. You may proceed with
Technical Configuration now or not, at your convenience.
Technical Configuration instructions are in the next two chapters of
this manual: Chapter 5 for T1/E1 MultiVOIP units and Chapter 6 for
Analog MultiVOIP units.