Mazda 2009 CX-9 - Manual (Page 362)

Black plate (362,1)
4. (Without the navigation system)
Prompt:
“Select one of the following:
Pairing options, confirmation prompts,
language, passcode, or select phone.
”
(With the navigation system)
Prompt:
“Select one of the following:
Pairing options, confirmation prompts,
language, passcode, select phone or
select music player.
”
5. Say: [Beep]
“Pairing options”
6. Prompt:
“Select one of the following:
Pair, edit, delete, or list.
”
7. Say: [Beep]
“Pair”
8. Prompt:
“Please say a 4-digit pairing
code.
”
9. Say: [Beep]
“XXXX” (Speak an
arbitrary 4-digit pairing code. This can
be any combination of 4 numbers.)
NOTE
Record the code as it will be used to program
your device in Step 16.
10. Prompt:
“Pairing code XXXX (4-
digit number). Is this correct?
”
11. Say: [Beep]
“Yes” or “No”
12. If
“Yes”, go to Step 13.
If
“No”, the procedure returns to Step
8.
13. Prompt:
“Start pairing procedure on
the device. See the device manual for
instructions.
”
14. Using the device, perform a search
for the Bluetooth device (Peripheral
device).
NOTE
For the operation of the device, refer to its
instruction manual.
15. Select
“Mazda” from the device list
searched by the device.
16. Input the 4-digit pairing code set in
Step 9 to the device.
17. Prompt:
“Please say the name of the
device after the beep.
”
18. Say: [Beep]
“XXXX - - -” (Speak a
“device tag”, an arbitrary name for
the device.)
Example:
“Stan's device.”
NOTE
Speak a programmed
“device tag” within 10
seconds.
If more than two devices are to be
programmed, they cannot be programmed with
the same or similar
“device tag”.
19. Prompt:
“Adding XXXXXX - - -
(Ex.
“Stan's device”) (Device tag). Is
this correct?
”
20. Say: [Beep]
“Yes”
21. Prompt:
“Pairing complete”
After a device is registered, the system
automatically identifies the device. By
activating Bluetooth Hands-Free again, or
by activating Bluetooth Hands-Free first
after turning the ignition switch from the
LOCK to the ACC position, the system
reads out a voice guidance,
“XXXXXX -
- - (Ex.
“Stan's device”) (Device tag) is
connected
”.
NOTE
(With the navigation system)
Device registration can also be done by
operating the panel buttons on the navigation
unit. Refer to the separate manual
“NAVIGATION SYSTEM”.
6-122
Interior Comfort
Bluetooth Hands-Free
CX-9_8Z66-EA-08F_Edition3 Page362
Tuesday, March 31 2009 1:53 PM
Form No.8Z66-EA-08F