Minicom Advanced Systems 5UM20114 - Manual (Page 57)

OPERATING GUIDE
.
56
Section 2: Operating the Smart 16 IP
system locally
This section explains how to operate the Smart 16 IP Switching system locally
through the On Screen Display (OSD) or Control software.
39. Switching between computers
Switch between the connected computers by either:
• Keyboard hotkeys
• The OSD (On Screen Display)
• Control software
The OSD / Control software is also the place to adjust various settings as
explained below.
40. The keyboard hotkeys
To switch to the next computer forwards press Shift then, +. Release Shift, before
pressing +.
To switch to the next computer backwards press Shift then, -. Release Shift,
before pressing -.
Note! With a US English keyboard you can use the + key of the alphanumeric
section or of the numeric keypad. With a Non-US English keyboard only use the
+ key of the numeric keypad.
41. The OSD
To display the OSD:
Press Shift twice. The OSD Main window appears. See
Port number
appears here
Instruction
keys
C=computer
S=switch