Minicom Advanced Systems 5UM20114 - Manual (Page 38)

SMART CAT5 SWITCH 16 IP
.
37
2 . From the Smart 16 IP menu choose Network Settings / Dynamic DNS. The
Dynamic DNS Settings appear. See Figure 25.
Figure 25 Dynamic DNS Settings
3. Check the Enable Dynamic DNS box.
4. Change the settings as desired.
Hostname - The Hostname registered during manual registration with the
Dynamic DNS Server. Spaces are not allowed in the Hostname.
Username/Password – Fill in the Username and Password.
Check time - Smart 16 IP card registers itself in the Dynamic DNS server at this
time.
Check interval - Interval for reporting again to the Dynamic DNS server by
Smart 16 IP.
Smart 16 IP has its own independent real time clock. Ensure the time setting is
correct by configuring a timeserver see page 35.
Smart 16 IP registers itself to the Dynamic DNS server slightly different from the
time configured. To reduce load peaks on the server we add a random time (0-10
min) to the absolute time value.
31. Serial Port Settings
From the Smart 16 IP Menu choose Serial Port Settings. The Serial Port Settings
appear. See Figure 26.