Moxa Technologies NE-4100 - Manual (Page 63)

NE-4100 Series User’s Manual Web Console Configuration
7-7
1. Select the NE-4100 Series module that you would like to unlock. Right click the mouse and
then select Unlock from the drop down list.
2. After inputting the correct password, the following window will open.
The meanings of the six states are as follows (note that the term Fixed is borrowed from the
standard fixed IP address networking terminology):
Lock
The NE-4100 is password protected, “Broadcast Search” was used to locate it, and the password
has not yet been entered from within the current Administrator session.
Unlock
The NE-4100 is password protected, “Broadcast Search” was used to locate it, and the password
has been entered from within the current Administrator session. Henceforth during this
Administrator session, activating various utilities for this NE-4100 will not require re-entering the
password.
Blank
The NE-4100 is not password protected, and “Broadcast Search” was used to locate it.
Fixed
The NE-4100 is not password protected, and “Search by IP address” was used to locate it.
Lock Fixed
The NE-4100 is password protected, “Specify by IP address” was used to locate it, and the
password has not yet been entered from within the current Administrator session.
Unlock Fixed
The NE-4100 is password protected, “Specify IP Address” was used to locate it, and the password
has been entered from within the current Administrator session. Henceforth during this
Administrator session, activating various utilities for this NE-4100 will not require re-entering the
password.