MITSUBISHI ELECTRIC MIM-G01 - Manual (Page 24)

6.1.2 Function Block SMS send
For sending SMS, add a function block GSM/SMS is to be added to your PLC project.
(Detailed information is to be found within the Alpha XL Communication manual.)
Double-click the GSM function block in order to configure it.
In the window that opens, click Setting and enter these data:
Now enter the following data:
SMS Service Center:
Enter the SMSC number within the upper field; this number may be obtained from your service
provider. If you want to send e-mail as well, enter the e-mail gateway number of your service pro-
vider, too.
MIM and Mitsubishi ALPHA XL Configuration
6 - 2 MITSUBISHI ELECTRIC
Fig. 6-2:
SMS Setting
Fig. 6-3:
GSM SMS (Short Message Service)