MITSUBISHI ELECTRIC MIM-G01 - Manual (Page 12)

2 Equipment Versions
2.1 Modem Typ
The Mitsubishi Normal Modem GSM requires, like any conventional modem, a software in the
PC like a program for dial-up connection or for tje sending and receiving of fax messages. A
Mitsubishi Super Modem however sends all data by using simple AT commands. No additionally
software is required in this case.
2.2 Teleservice via PC
A Mitsubishi Industrial Modem (MIM-A01, MIM-G01) can be used to handle the remote mainte-
nance of several controllers via a telephone line or via the Internet. Program up-
and download may be carried out via the Mitsubishi programming software (e.g.
GX IEC Developer), while the connection therefore may be established via the
Mitsubishi programming software
Modem Typ Equipment Versions
2 - 2 MITSUBISHI ELECTRIC
Normal Modem GSM Super Modem 56k
Telephone network GSM Analogue fixed network/56K
Memory — 30 – 100 kB SRAM
Sending of
SMS
E-Mail (SMS-to-E-Mail-Gateway)
Fax (Fax-to-Fax-Gatewy)
SMS
E-Mail
Fax
Express E-Mail
Triggered by AT command AT command
Modem functions
Teleservice Yes Yes
Automatically Alarming — —
Remote switching — —
Available models MIM-G01 MIM-A01
Tab. 1-1 Mitsubishi Industrial Modems at a glance