MITSUBISHI ELECTRIC MIM-G01 - Manual (Page 13)

3 Mounting and Installation
3.1 Normal Modem GSM (MIM-G01)
The MIM-G01 is a GSM/GPRS mobile modem intended for transmission of data, SMS, e-mail
and fax messages within the 900 MHz and 1800 MHz GSM mobile networks and complies to the
high speed standard of GPRS Class 10. It is suitable for DIN-Rail mounting inside control boxes.
3.1.1 Interfaces and Connectors
NOTE For connecting the modem to a PC, a 1:1 serial standard cable is to be used. For information
to connect a PLC, refer to the PLC documentation.
Mounting and Installation Normal Modem GSM (MIM-G01)
Mitsubishi Industrial Modem 3 - 3
Status GSM
Fig. 3-1: Overview of all connectors of the Normal Modem GSM
ᕥ
ᕤ
ᕣ ᕢ
ᕡ
Nr. Description Meaning
ᕡ
Antenna Plug (FME) for Antenna cable (impendance: 50 Ω)
ᕢ
10...40VDC Power supply (2 screw terminals) and power supply jack
ᕣ
LEDs 2 LEDs (Power and Line)
ᕤ
SIM-Karte Power supply (2 screw terminals)
ᕥ
RS232 Interface 9 pin D-Sub jack
Tab. 3-2: Description of the connectors of the modems