MITSUBISHI ELECTRIC MIM-G01 - Manual (Page 30)

Login without parameters
[password] Login with password
[ ] Login without password
Login with password and parameters
[password; Format:format; Handshake:handshake; Keep:timeout; Baudrate:
RS232Speed]
For a description of the parameters, see Section 6.4.2
The configuration of the Mitsubishi Super Modem should be done locally during set-up, tested
and only then approved for remote dial-in.
The remote modification of the parameters overwrites the previously configured – and tested -
parameters
The remote modification of the parameters should only be used if it is absolutely necessary.
It can also be used to exclude possible local modifications.
RS 232-Transparent-Mode (TransMode) Configuration
6 - 8 MITSUBISHI ELECTRIC