Mercedes-Benz 2004 G 500 - Manual (Page 147)

147
Controls in detail
Transfer case
ț TC SHIFT – CANCELLED
The shift did not take place.
̈ Repeat the shift procedure.
ț TRANSFER CASE – VISIT WORKSHOP!
There may be a malfunction in the sys-
tem.
̈ Repeat the shift procedure.
̈ If the shift procedure still does not take
place, have the vehicle checked at your
authorized Mercedes-Benz Light Truck
Center as soon as possible.
For more information, see “Practical hints”
section (
୴ page 281).
i
If the SmartKey is in starter switch
position 0 or 1, an alarm will sound if
the transfer case is in position N and
the driver’s door is opened.
Engage transfer case to gear position
HIGH or LOW.