Mercedes-Benz 2004 G 500 - Manual (Page 123)

123
Controls in detail
Control system
Should any malfunctions occur while driv-
ing, the number of malfunctions will reap-
pear in the display when the SmartKey in
the starter switch is turned to position 0 or
removed from the starter switch. Settings menu
In the SETTINGS... menu there are two
functions:
ț The function RESET: R BUTTON FOR
3 SEC. , with which you can reset all the
settings to those set at the factory.
ț A collection of submenus with which
you can make individual settings for
your vehicle.
̈ Press button è or ÿ repeatedly
until the SETTINGS ... menu is seen in
the display.
Resetting all settings
You can reset all the functions of all sub-
menus to the factory settings.
̈ Press the reset button in the instru-
ment cluster (
୴ page 112) for approxi-
mately three seconds.
In the display you will see the request
to press the reset button again to con-
firm.
̈ Press the reset button again.
The functions of all the submenus will
reset to factory settings.
i
The message memory will be cleared
when you turn the SmartKey in the
starter switch to position 1 or 2. You
will then only see Priority 1 malfunc-
tions (
୴ page 260).