Metz LCD-TV - Manual (Page 83)

83
35.1 Connecting a Hifi
Amplifier/AV Receiver
Registering the AV Device with the TV
• Enter the TV menu by pressing "MENU".
• Press the yellow key to open the "AV Devices"
menu.
• Use the cursor control key ̆ to select "Hifi
Amplifier" in the device selection.
• Press "OK" twice, use the cursor control key ̆ to
select "Signal Types", and press "OK"..
• For connection type ᕡ , select the signal type
"Signal IN - SPDIF“.
For connection type
ᕢ , select the signal type
"Signal IN – Stereo".
Confirm the setting by pressing "OK"
• Press the "EXIT" key to close the TV
menu.
Sound:
• To configure the sound settings of the
LCD TV, press the yellow key and
use the cursor control key ̄ to select
the menu item "Sound via ...".
• For connection type ᕡ, use the - + key
to select "Sound via Hifi".
The speakers of the LCD TV are muted.
The sound (AC3 or stereo sound) is
rendered over the speakers of the Hifi set.
• For connection type ᕢ, use the - + key to select
"Sound via surround".
The speakers of the LCD TV are used as the centre
box. The sound (AC3 or stereo sound) is rendered
over the speakers of the Hifi unit.
Name
Signal types
Connect
Camcorder/Photo
HiFi amplifier
AV-Receiver
Other device 3
Other device 2
Other device 1
PC
Satellit / set top
DVD Player 2
DVD Player 1
Connect as follows:
HiFi amplifier Stereo No Signal Cinch
:select
:connect
and clear.
OK
✗
HiFi
➔
➔
F1 ➔
MENU
Opening the menu
OK OK
OK
EXIT
606 47 2014.A1 LCD-GB MK 22.06.2006 14:13 Uhr Seite 83