Metz LCD-TV - Manual (Page 69)

69
Connection of external devices with YUV compo-
nent output to the "COMPONENT IN" RCA jacks.
The signal type always refers to the input
and output of the AV device.
AV devices equipped with a YUV jack can be con-
nected to the LCD TV by means of a YUV cable
(see page 81). In the "AV Devices" menu, the con-
nected AV device must be registered with signal
OUT "YUV".
Setting the YUV Signal Type
- Enter the TV menu by pressing "MENU".
- Press the yellow key to open the "AV Devices"
menu.
- Use the cursor control to select the AV device
whose signal type you want to change and press
"OK".
- Press numeric key
·
, use the cursor
control to select "Signal OUT", and use
the - + key to set "YUV".
- Confirm the setting by pressing "OK".
- Exit the "TV Menu" by pressing "EXIT".
Caution ! This may cause an exi-
sting connection diagram to be
modified. If so, you must recon-
nect the AV devices accordingly.
☞
☞
MENU
Other device 3
Other device 2
Other device 1
PC
Satellit / set top
DVD Player 2
DVD Player 1
DVD/Videorec.3
DVD/Videorec.2
DVD/Videorec.1
Signal OUT YUV(HD) Signal IN CVBS
Change with
Accept value with
OK
OK
ᕢ
OK
EXIT
Opening the menu
The number of subjects and sections depends
on the selected scope of operation. Depending
on the configuration of the TV set, the various
menu items may be displayed in a different
order and numbered differently.
– +
F1 ➔
DataLogic
Name
Signal types
Connect
✗
✗
25. Registering AV Devices
Setting signal types YUV
606 47 2014.A1 LCD-GB MK 22.06.2006 14:13 Uhr Seite 69