Metz LCD-TV User Manual

Page 37

In the case of TV sets with one front end, the pic-
ture in picture function (PIP) can only be used for
the superimposition of an AV set.
In this regard, the following superimposition
options are possible:
If an analogue TV station is displayed on the
screen

, it is only possible to call up the picture of

an AV set, which is connected either to the
“HDMI” or the “DVI-D” socket.
If a digital TV station (DVB-C or DVBT) is display-
ed on the screen

, it is possible to call up the pictu-

re of any AV set, regardless of the socket it is con-
nected to.
In the case of TV sets with two front ends, it is
possible to call up a different analogue program-
me or the picture of any AV set, regardless of the
socket the set is connected to.

Activating the PIP function

• The F1 key is pre-programmed with the picture-

in-picture function.

• You can use the cursor control keys

̇ ̈ to move the PIP picture on the

screen. The last position to which this
picture was set is saved.

• By pressing the "OK" key, you can set

the frame of the PIP picture to active
(red) or inactive (white).

• The contents of the PIP picture can be

changed only if its frame is active
(red). If this is the case, you can use
the numeric keys or the "P+/P-"
rocker key to select a different AV
programme position.

17. Special Functions

Picture-in-Picture

Opening the menu

606 47 2014.A1 LCD-GB MK 22.06.2006 14:13 Uhr Seite 37