Metz LCD-TV - Manual (Page 102)

102
With the menu item, "General settings", you can
specify whether or not the data are to be saved in
the non-volatile memory of the TV set when trans-
mission parameters are changed.
This update function applies to stations which use
different transmission parameters at different times
of the day, such as when they transmit regional
programmes.
Setting the data update function
• Press the MENU key to open the TV menu.
• Press the red key to open the menu "Confi-
guration".
• Press the appropriate numeric key (in
this example ᕥ to select "DVB-S".
• The cursor is located on the line "LNB
supply voltage".
• Press the appropriate numeric key (in
this example ᕪ to select "General
settings".
• In the setting window, use the - + key
to set "Update data" to "On".
• Press the OK key to confirm the new
setting.
• Press the EXIT key to close the TV menu.
Calling the menu
A2. Setting the stations
Updating the data
The number of subjects and sections depends
on the selected scope of operation. Depending
on the configuration of the TV set, the various
menu items may be displayed in a different
order and numbered differently.
MENU
ᕥ
ᕪ
OK
EXIT
General settings
Manuall search
Automatic search
Search settings
Satellite D
Satellite C
Satellite B
Astra 1
DiSEqC system
LNB supply voltage
Function for F2
Function for F1
EURO sockets
DVB-C
DVB-T
DVB-S
Analog-TV
Country
Language
Operating
Update data on
Change with
Accept value with
F1 ➔
OK
– +
606 47 2014.A1 LCD-GB MK 22.06.2006 14:13 Uhr Seite 102