Metz LCD-TV - Manual (Page 33)

The menu items "On time" and "Off time"
are not available in a 2 ** menu.
In the menu item "Timer control", you can pro-
gramme a switch-on time, a switch-off time and a
sleep timer (switch off after ...).
The switch-on time is the time at which the TV set
is to be switched on automatically.
The switch-off time is the time at which the TV set
is to be switched off automatically.
The sleep timer (switch off after...) switches off the
TV set after a programmed delay (which can be
set in steps of 15 minutes).
Setting the on time and off time
• Press the "MENU" key to open the TV
menu.
• Press the green key to open the
"Timer" menu.
• Press the numeric key
ᕢ
to select
"Timer control".
• Press the "OK" key and then, in the
setting window, enter the desired time
(four digits) with the numeric keys.
• Press the "OK" key to save the set-
ting.
• Press the "EXIT" key to close the TV menu.
At the programmed on time, the TV set is switched
on from the standby state (red LED lights). You
must confirm this automatic action by pressing
any key on the remote control. If this is not done,
the TV set will switch back to the standby state
after 10 minutes. This ensures that the TV set does
not stay on if you are not at home.
If you do not want to have the TV set switch
itself on each day, you must clear the on
and off times in the menu by pressing the ll
key.
☞
☞
33
16. Timer Control Opening the menu
Switch off after...
Switch-off time
Switch-on time
Recording control
Timer setting
Timer control
Reminder
Childlock
Time 19:00
MENU
OK
EXIT
OK
ᕣ
Clear the time with
Save with
Abort with
OK
The number of subjects and sections depends
on the selected scope of operation. Depending
on the configuration of the TV set, the various
menu items may be displayed in a different
order and numbered differently.
MENU
I I
606 47 2014.A1 LCD-GB MK 22.06.2006 14:13 Uhr Seite 33