Motorola A925 User Manual
Page 58
58 - Messages and Email
4 Enter the following:
Account name
– Enter a name for this account.
Connection type
– Select the type of network this
account uses to connect to the Internet. Your service
provider supplies this information.
5 Tap
Advanced
.
6 On the
Server
tab, enter the following:
User name and password
– Usually, you do not have to
enter these when you connect to the Internet.
However, some service providers may require you to
enter them.
Address
– Enter the Internet address of your account.
Your service provider supplies this address.
7 On the
Log in
tab, check the
Get IP address automatically
and
Get DNS address automatically
boxes.
The handset will automatically retrieve the IP and
DNS addresses from your service provider.
If, after you set up an Internet account, you cannot
connect to the Internet and you suspect these
addresses are incorrect, ask your service provider for
their IP and DNS addresses. Enter these addresses
in the
IP address
and
Primary/Secondary DNS address
boxes.
Do This