Motorola DSR405 - Manual (Page 43)

Installation
DSR405 User Guide 29
• Choose option 6 (Change System Settings).
• Choose option 3 (Installation Settings).
• On the Installation Settings menu, choose option 2 (Set Remote Control
Address). Now follow the instructions on the Remote Control Address screen.
• If you have four receivers, you will have to change the addresses on three of
them: they will have address of 000, 001, 002, and 003.
To program your remote control for each receiver, hold down the SAT key on the
remote control until the light flashes. Once the light begins to flash enter the
desired address.
System Status
This is a view-only screen that displays information about the status of the
receiver.
Trip Counter. Trip Counter
displays the number of
message updates from your
service provider.
Modem Status. Displays a
number of messages that
describe the current modem
status.
Caller ID
When your telephone rings
the Caller ID feature allows
you to see who may be
calling. This feature is only
available if Caller ID
functionality is enabled by
your telephone company. See
the "Options" section for
more detailed information.