Motorola DSR405 - Manual (Page 42)

3
28
Audio Settings
If you are in SAT mode
(digital) broadcast, two
options appear on the Audio
Settings menu.
Audio Connections. Select
option 1 (Audio
Connections), and you will be
able to select either TV or
HiFi (the default is TV).
Select TV if the receiver’s
AUDIO OUT port is
connected to your TV. Select
HiFi if it is connected to your stereo system.
Satellite Audio. Select option 2 and then select Mono, Stereo, Surround or Dolby
Digital (the default is Surround). The Dolby Digital selection will disable other
audio ports.
Installation Settings
Tune in Satellite Signal. This option allows you to see the strength of the signal
your antenna is receiving.
Set VCR Code. This option
allows you to store your VCR
code in your receiver. When you
use timers and want to record
your favorite program, your
receiver will control your VCR.
Set Remote Control Address.
This option allows you to
control up to four receivers in a
centralized area, with one or
more remote controls. Each
receiver requires a separate
address. The default address is 000.
On the front panel of your receiver press the Menu button to bring up the Menu
screen.
• Choose Options.