Motorola DSR405 - Manual (Page 39)

Installation
DSR405 User Guide 25
increments. When the signal strength begins to decrease, mark the location on
the mounting pole.
• The optimum compass direction setting is midway between the two points.
• Tighten the bolt(s) on the mounting pole so that it cannot move east or west.
Authorizing Your Receiver
• Press the EXIT key on the remote control. Then press the number keys for the
authorization channel.
• Press the OPTIONS key on the remote control. The Options menu will appear.
• From the Options menu,
select option 6 (Change
System Settings), and the
System Settings menu
will appear.
• Select option 4 (Check
System Status), and the
System Status menu will
appear. Line A shows
your Unit ID number.
• Telephone the company
that provides your
programming subscription, and ask to authorize your unit.
• When your receiver has received the authorization message the Trip Counter
on the Installation Settings menu will advance.
Completing the Receiver Connections to
Your Entertainment System
You will need to make changes to connect your VCR.
• Connect the top/left TV terminal on the back panel of the receiver to the IN
terminal on the VCR. If you had already connected this cable to your TV you
must disconnect and connect it to your VCR.
• Connect the OUT terminal(s) on the VCR to the VHF IN terminal(s) on the
TV.