Motorola DSR405 - Manual (Page 36)

3
22
Choosing the Menu Language
To make sure that the menus are displayed in the appropriate language for you,
complete the following steps:
• While your receiver is turned on, aim the remote control at the receiver and
press the OPTIONS key. The Options menu will appear.
• From the Options menu, select option 6 (Change System Settings), and the
System Settings menu will appear.
• Select option 1 (Change
Viewing and Language
Settings), and the
Viewing & Language
Settings menu will
appear.
• Option 3 shows you the
language options
available for the menus.
Press the
56
keys on
the remote to select your
language.
• Once you have chosen a language, press the GO BACK key until you return to
the Options menu or press the EXIT key to exit and return to watching
programs.
Acquiring a Signal
Complete the following steps to help you acquire a signal:
• Using the number keys on the remote control, tune to the authorization channel
(refer to the information supplied with your system). You should see a banner
with the channel number at the top of the screen.
• Press the OPTIONS key on the remote control. The Options menu will appear.
• From the Options menu, select option 6 (Change System Settings), and the
System Settings menu will appear.
• Select option 3 (Change Installation Settings), and on the Installation Settings
menu select option 1 (Tune in Satellite Signal).
• Look at the value in the box labelled Signal. If it is less than 10, make sure that
all connections between the satellite dish LNBF and the satellite receiver are
correct. If the signal strength remains below 10, adjust the position of the dish
in very tiny increments until you receive a satellite signal above 10.