Micron Technology Transport LT - Manual (Page 86)

Power Menu Using System Setup
86
Suspend
Mode: Save To RAM
Save To Disk Specifies the type of rest mode your computer enters:
• Save to RAM : Saves power by turning off the
microprocessor and all devices except system
memory and controller, and video memory and
controller.
• Save To Disk : Provides the greatest power-saving
capabilities by essentially turning off your
computer. In the save to disk mode, all system
logic (except for your computer wakeup circuitry
and battery charger) is turned off. During save to
disk mode, the system and video memory are
saved to the hard drive and are restored when
your computer resumes from rest.
• When the computer enters save to disk mode, it
will not resume normal operation at a specified
time no matter how the Resume On Time field is
set.
Hard Disk
Timeout: Sets the amount of time the hard disk needs to be inactive
before it is turned off.
Resume On
Modem Ring: Enables the computer to resume operation from rest
mode in the event of modem communication. The
computer will resume only if the Suspend Mode field is
set to Save to RAM
, not Save To Disk . The default
setting is Off . To enable this feature, AC adapter should
be plugged into the computer.
Resume On
Time: Enables the computer to resume operation from rest
mode at a scheduled time. The computer will resume only
if the Suspend Mode field is set to
Save to RAM , not
Save To Disk . If you set this field to On, you must set the
Resume Time field as well. The default setting is Off . AC
adapter should be plugged in to work this feature.
TABLE 16. (Continued) Power Menu
Feature Option Description