Micron Technology Transport LT User Manual
Page 51
Installing the Modem Driver in Windows 95/98
Introducing Your TransPort LT
51
Display the result value
After entering AT commands, the result value is displayed on the screen.
The result value can be displayed during communication. Generally, the result will
be OK. According to the ATV command, the result can be displayed as Words or
numeral letters. (ATVO: Display as numeral letters, ATV1: Display as English
words).
Basic AT Commands
A/
Repeats the previous command in the buffer
ATA
Responds manually to incoming RING signals
+++
Switches from on-line mode to command mode
ATO
Switches from command mode to on-line mode
ATEn
Echo control
E0
Disables echoing of the commands to the screen
E1
Enables echoing of the commands to the screen
ATDT phone number
Touch tone dial
ATDP phone number
Pulse dial
ATHn
Hook control
H0
On-Hook (same as hang-up)
H1
Off-Hook (same as hold-on)
ATLn
Modem speaker loudness control
L0~1
Low volume
L2
Medium volume
L3
High volume
ATMn
Modem speaker control
M0
Disables modem speaker
M1
Enables only when in connection procedure