Micron Technology Transport LT - Manual (Page 138)

To (re)install your original applications and drivers: Restoring your Computer
138
7. Type FDISK at the prompt and partition your hard drive.
8. Restart your computer to allow it to recognize the new partitions.
9. Type FORMAT C:/S at the prompt to format the C: drive, repeat this for any
other drives that you may have.
10.Restart your computer.
11.Choose Start Windows 98 Setup .
12.Follow the prompts to install your Operating System.
Windows NT 4.0 Workstation: 1. Turn off the computer and insert your CD-ROM drive into your computer. (See
”Using the CD-ROM Drive” on page 37 for instructions.)
2. Insert your Microsoft Operating System CD-ROM into the CD-ROM drive and
start your computer.
3. Follow the prompts. The installation program will partition and format your hard
drive as necessary, see the documentation that accompanied your Operating
System for more information on installation and setup.
To (re)install your original
applications and drivers:
1. Start your computer and wait for the Operating System to finish loading.
2. Insert your System utility CD-ROM into the CD-ROM drive.
3. Select the first application or driver to begin its installation.
4. Repeat step 3 for each application and driver, reboot if necessary.