Micron Technology Transport LT - Manual (Page 108)

Drive Image Professional Software Utilities
108
ImageShield To password-protect your image file, click Password Protect Image File and
type a password in the Password field.
N OTE : Record image file passwords and store them in a safe place. If you forget an
image file’s password, you cannot restore the file.
Split Image File Into Multiple Files Sometimes it is useful to force Drive Image to split a large image file into smaller
files. To do so, click Split Image File Into Multiple Files and enter the maximum
byte size for each file in the File Size (bytes) field. If you wish to save the files to
CDs, specify a file size of 650,000,000 bytes (650 MB) or less.
Restoring Image Files • If you are restoring an image file to set up a new hard drive on a machine
with a BIOS older than 1994, see “Using Drive Image with Drive Overlay
Software” in the Drive Image manual on the MRestore CD, located at
PQtools\userinfo.
• To restore selected files from a compressed or spanned image file, see
“Restoring Files from Spanned or Compressed Images” in the Drive Image
manual included on the MRestore CD.
To restore an image file to a different drive or partition:
1. Ensure that virus protection is disabled in the BIOS. If virus protection is
enabled, Drive Image will hang when you click Finish at this end of this
procedure.
2. Start Drive Image, then click Restore Image.