See figure 2-5 error message – Micron Technology USB Camera User Manual
Page 18
Installation: Automatic Camera Installation
14
SMX-M8xx Series USB2.0 Camera User Guide
Figure 2-5 Error message box when the SMX-M8xx Setup Wizard failed to detect USB2.0 Host
Controller
Note:
It is recommended to update your system configuration in the case of Warning status, otherwise the device
might not work properly
It is strongly recommended to update the system configuration in the case of Fail status, otherwise the device will
not work at all
If all the system information was marked as Ok, the next window of the SMX-M8xx
USB2.0 Camera Setup Wizard will appear. Follow easy-on-screen recommendations
and when ready press the Install button (
see Figure 2-6 The SMX-M8xx Setup Wizard: ready
).
Figure 2-6 The SMX-M8xx Setup Wizard: ready to install