Milan Technology MIL-W2332G - Manual (Page 68)

60
B-3: Unknown Problems
•
The AP has been set to obtain an IP address automatically by DHCP. How can I know
its acquired IP address so that I can manage it using a Web browser?
ƒ Use the utility, Wireless Router/AP Browser (WLBrwsr.exe), in the “Utilities” folder on
the companion CD-ROM disc. This utility can discover nearby APs and show their MAC
addresses and IP addresses. In addition, it can launch the default Web browser on
your computer.
Fig. 61. Wireless Router/AP Browser.
•
The AP stops working and does not respond to Web management requests.
ƒ The firmware of the AP may be stuck in an incorrect state.
Unplug the power connector from the power jack, and then re-plug the connector
to restart the AP.
Contact our technical support representatives to report this problem, so that the
bugs can be static in future firmware versions.
ƒ If the AP still does not work after restarting, there may be hardware component failures
in the AP.
Contact our technical support representatives for repair.