Milan Technology NDM-FTX-XX-01 - Manual

USER’S GUIDE
NDM-FTX-xxxxx-01 (standard)
NDM-FTX-xxxxx-01(L) (low profile)
Fast Ethernet Fiber/Dual Media NICs
• Fast Ethernet
• Copper and Fiber
• 10/100Base-TX and/or 100Base-FX
Transition Networks NDM-FTX series
fast Ethernet dual media NIC (Network
Interface Card) provides a 10/100Base-
TX copper port and a 100Base-FX fiber
port for installation flexibility in a
mixed-media environment. The dual
ports can also provide redundancy for
critical applications. These NICs come in standard and low profile form factors, and
include driver support for a variety of operating systems.
NDM-FTX-ST-01
NDM-FTX-ST-01(L) RJ-45
100 m (328 ft)* ST, 1300 nm multimode
2 km (1.2 miles)*
NDM-FTX-SC-01
NDM-FTX-SC-01(L) RJ-45
100 m (328 ft)* SC, 1300 nm multimode
2 km (1.2 miles)*
NDM-FTX-MT-01
NDM-FTX-MT-01(L) RJ-45
100 m (328 ft)* MT-RJ, 1300 nm multimode
2 km (1.2 miles)*
NDM-FTX-SC5-01
NDM-FTX-SC5-01(L) RJ-45
100 m (328 ft)* SC, 1310 nm single mode
5 km (3.1miles)*
RJ-45
100 m (328 ft)* SC, 1310 nm single mode
20 km (12.4 miles)*
RJ-45
100 m (328 ft)*
NDM-FTX-SB201-01
NDM-FTX-SB201-01(L) RJ-45
100 m (328 ft)*
SC, 1550 TX/1310 nm RX single
mode, single fiber 20 km (12.4 miles)*
SC, 1310 TX/1550nm RX single
mode, single fiber 20 km (12.4 miles)*
NDM-FTX-SC20-01
NDM-FTX-SC20-01(L)
NDM-FTX-SB202-01
NDM-FTX-SB202-01(L)
Part Number Port One - Copper
10/100Base-TX Port Two - Duplex Fiber-Optic
100Base-FX
*Typical maximum cable distance.
Actual distance is dependent upon the
physical characteristics of the network
installation. Installation . . . . . . . . . . . . . . . . . . .2
Cable Specifications . . . . . . . . . . .4
Technical Specifications . . . . . . . .5
Troubleshooting . . . . . . . . . . . . . . .6
Contact Us . . . . . . . . . . . . . . . . . . .7
NDM-FTX-xxxxx-01
Part Number Description
BTR-NDM-RPL RPL, Bootable ROM Chip
BTR-NDM-PXE PXE, Bootable ROM Chip
Optional accessories sold separately