Milan Technology MIL-W2332G User Manual

Page 38

8. Trigger the firmware upgrade process by clicking Upgrade.

Fig. 28. TFTP Server.

NOTE:

After the dialog box of the TFTP server program appears, be sure to specify the

working folder within which the downloaded firmware files reside.

NOTE:

Make sure the Accept read requests check box of TFTP Server is selected.

NOTE:

The LAN IP address of the AP and the IP address of the TFTP server must be in

the same IP subnet for TFTP to work.

NOTE:

Due to the unreliable nature of wireless media, it’s highly recommended that the

TFTP server and the to-be-upgraded wireless AP be connected by Ethernet, and on the
same LAN, so that the upgrade process would be smooth.

NOTE:

After the firmware is upgraded, be sure to delete the contents of the Web

browser cache, so that the Web management pages can be shown correctly.

NOTE:

A failed upgrade may corrupt the firmware and make the AP unstartable. When

this occurs, call for technical support.

TIP:

If you want to remotely upgrade the firmware of a deployed AP from the Internet,

adjust the Timeout and Max no. of retries settings of TFTP Server for remote TFTP
upgrade to succeed.