Milan Technology MIL-W2332G - Manual (Page 22)

14
Fig. 10. Antenna alignment assistance.
Instead of using PING.exe, you can run Wireless Network Manager on Computer 1, and
go to the Antenna Alignment tab. Click Start to begin monitoring the WDS link quality.
Adjust the alignment of the antenna of Bridge 1 until the Link quality indicator shows a
relatively maximal value. Finally, click Stop to stop monitoring WDS link quality.
TIP: If you are doing dynamic bridging, you can use the Link Monitor feature on the AP
Client side to help you align the directional antennas. Refer to Section 0 for more infor-
mation.
Fig. 11. Link monitor.