Milan Technology MIL-W2332G - Manual (Page 27)

19
3.1.1 Menu Structure
The left side of the start page contains a menu for you to carry out commands. Here is a
brief description of the hyperlinks on the menu:
•
Home. For going back to the start page.
•
Status. Status information.
ƒ Wireless Clients. The status of the wireless clients currently associated with
the AP.
ƒ DHCP Mappings. Current IP-MAC address mappings of the built-in DHCP
server.
ƒ System Log. System events log.
ƒ Link Monitor. When the AP is in AP Client mode, this page shows the signal
strength and link quality of the wireless link to its associated access point.
•
General. Global operations.
ƒ Operational Mode. Operational mode of the AP—AP/Bridge or AP Client.
ƒ Password. For gaining rights to change the settings of the AP.
ƒ Firmware Tools. For upgrading the firmware of the AP, backing up and restor-
ing configuration, and configuration reset settings of the AP.
•
TCP/IP. TCP/IP-related settings.
ƒ Addressing. IP address settings for the AP to work with TCP/IP.
ƒ DHCP Server. Settings for the DHCP (Dynamic Host Configuration Protocol)
server on the AP.
•
IEEE 802.11. IEEE 802.11g-related settings.
ƒ Communication. Basic settings for the IEEE 802.11g interface of the AP to
work properly with wireless clients.
ƒ Security. Security settings for authenticating wireless users and encrypting
wireless data.
ƒ IEEE 802.1x/RADIUS. IEEE 802.1x Port-Based Network Access Control and