Milan Technology MIL-W2332G - Manual (Page 17)

9
Fig. 4. The Start page.
2.4.2 Step 1: Selecting an Operational Mode
Fig. 5. Operational modes settings.
Go to the General, Operational Mode section, select an operational mode and click
Save at the bottom of this page, and then you are brought back to the start page.
The AP supports 2 operational modes:
•
AP/Bridge. This mode provides both Access Point and Static LAN-to-LAN Bridging
functionality. The static LAN-to-LAN bridging function is supported through Wireless
Distribution System (WDS).