Milan Technology MIL-W2332G - Manual (Page 63)

55
Appendix A: Default Settings
TIP: Press the Default (SF-Reset, or Soft-Reset) switch on the housing of a pow-
ered-on AP to reset the configuration settings to factory-default values.
Setting Name Default Value
Global
User Name root
Password root
IEEE 802.11g
Regulatory Domain FCC (U.S.)
Channel Number 11
SSID wireless
SSID Broadcasts Enabled
Transmission Rate Auto
Transmit Power High
MAC Address See the label on the accompanying
PCMCIA card or the label on the
housing of the AP.
Security Mode Open System
Selected WEP Key Key #1
WEP Key #1 00-00-00-00-00
WEP Key #2 00-00-00-00-00
WEP Key #3 00-00-00-00-00
WEP Key #4 00-00-00-00-00
MAC-Address-Based Access
Control
Disabled
Access Control Table Type Inclusive
Wireless Client Isolation Disabled
AP Load balancing Disabled
Link Integrity Disabled
Association Control
Max Number of Clients 64
Block Clients if Traffic
Load Exceeds Disabled
LAN Interface
Method of obtaining an IP Ad-
dress Set manually
IP Address 192.168.1.254
Subnet Mask 255.255.255.0
Default Gateway 0.0.0.0
DHCP Server Disabled
Management
UPnP Enabled