Motorola MotoWI4 PTP 600 Series User Manual
Page 97
95
Wireless Tx Packets: This displays the total number of good packets the bridge has sent for
transmission by the wireless interface
.
Wireless Rx Packets: This displays the total number of good packets the bridge has
received from the wireless interface. See note 20.
Ethernet Tx Packets: This displays the total number of good packets the bridge has sent for
transmission by the local Ethernet interface. . See note 20.
Ethernet Rx Packets: This displays the total number of good packets the bridge has
received from the local Ethernet interface. . See note 20.
Packets To Internal Stack: This displays the total number of good packets the bridge has
transmitted to the internal stack (e.g., ARP requests, PING requests, HTTP requests). . See
Packets From Internal Stack: This displays the total number of good packets the bridge has
received from the internal stack (e.g. ARP responses, PING replies, HTTP responses). . See
Transmit Data Rate: The data rate in the transmit direction, expressed in Mbps and
presented as: max, mean, min, and latest histogram format. The max, min and latest are true
instantaneous measurements, the mean is the mean of a set of one second means. See Note
15. Expected data rates can be found in section 6.1.4.
Receive Data Rate: The data rate in the receive direction, expressed in Mbps and presented
as: max, mean, min, and latest histogram format. The max, min and latest are true
instantaneous measurements, the mean is the mean of a set of one second means. . See
Note 15. Expected data rates can be found in section 6.1.4.
Aggregate Data Rate: The sum of the data rate in the directions, expressed in Mbps and
presented as: max, mean, min, and latest histogram format. The max, min and latest are true
instantaneous measurements, the mean is the mean of a set of one second means. See Note
15. Expected data rates can be found in section 6.1.4.
Link Capacity: The maximum aggregate data capacity available for user traffic under the
current radio link conditions, assuming the units have been connected using Gigabit Ethernet.
The sum of the displayed Transmit and Receive data rates may be lower than this figure if the
link isn't fully loaded by the current traffic profile.
20
The number in (+nn) displays the number of packets received since the last page refresh.