beautypg.com

Figure 51 - reboot confirmation pop up – Motorola MotoWI4 PTP 600 Series User Manual

Page 112

background image

110

If the settings are correct and appropriate, click the “Confirm Configuration, Arm Installation

and Reboot” button. The user will now be prompted to confirm the action (Figure 51).

Figure 51 - Reboot Confirmation Pop Up

All the attributes are committed to non-volatile memory. Immediately following the write to

non-volatile memory the unit is reset.

Note: If you have changed the Ethernet parameters you must reconnect using the correct

network and address settings.

See also other documents in the category Motorola Hardware: