Motorola MotoWI4 PTP 600 Series - Manual (Page 150)

148
9.2 Reset IP & Ethernet Configuration
To reset IP & Ethernet configuration back to factory defaults the user should press the “Reset
IP & Ethernet Configuration back to factory defaults” button on the “Recovery Options” page
(Figure 81). The user will now be presented with a pop up box asking them to confirm the
action (Figure 85).
Figure 85 - Confirm Reset to Factory Default Pop Up
On confirmation the following page will be displayed (Figure 86). The user should now reboot
the unit by pressing the “Reboot” button.
Figure 86 - IP and Ethernet Erased Successfully page