Minolta PAGEWORKS 20 - Manual (Page 75)

3-25
Ch
ap
te
r 3
U
s
ing Y
our
Pr
inter
Printing on Envelopes
- Tray 1 only.
- The following lists the envelope sizes you can specify from the
control panel or printer driver.
ISO B5 (176mm x 250mm)
COM10 (Commercial-10) (4.125” x 9.5”)
C5 (162mm x 229mm)
DL (110mm x 220mm)
Monarch (3.875” x 7.5”)
- Select the envelope size you want to print in the tray1 paper size
setting mode.
See “Tray 1 Paper Size Setting Method” page 3-2.
- Load envelopes face up.
- The top edge of the envelopes should be loaded facing the left
paper guide plate.
- Specify envelope as the media type from the control panel.
See “Understanding the Printer Menus” page 3-11.
- Do not specify duplex printing.
Note the following points whenever printing on envelopes.
•
Make sure that all edges are created sharply and that all flaps are
folded correctly.
•
Do not use envelopes that are self-adhesive. Use only envelopes
that have standard adhesive that sticks after it is moistened.
•
Use envelopes whose flaps run the entire length of the envelope.
Envelopes that seal at on end will not feed properly.
•
Do not use envelopes that have a window. Such envelopes can
seriously damage the printer.
•
Do not use envelopes that are wrinkled.
•
Never use envelopes that have clasps or any other type of fastener
that can damage the printer.
•
Do not store envelopes in an area that is subject to high humidity.
3. Loading Paper
OperatW3.frm 25 ページ ２００３年１１月１８日 火曜日 午前９時５１分