Minolta PAGEWORKS 20 - Manual (Page 40)

2-10
Ch
apt
er
2
Setting Up
Turning the Printer ON
Press the power switch to the  (ON)
position.
This printer will automatically go
into power save mode a given
period of time after the last activ-
ity.
See “System Menu” page 3-12.
When you turn the printer on, the following takes place.
1. All the LED’s light up and then go out.
2. Asterisks appears on the display from left to right.
3. The message
SELF TEST appears on the display.
When the printer detects an error during an initialization or
diagnostic, an error massage appears on the display.
For details, see “Understanding Printer Messages” page 5-12.
4. The message WARMING UP appears on the display.
5. The message READY is displayed after warming up is com-
pleted.
This takes about 70 seconds. The printer is now ready to print.
Turning the Printer OFF
Make sure that the printer is nothing
operating.
Press the power switch to the ❍
(OFF) position.
5. Turning the Printer ON and OFF
NOTE
Setting2.frm 10 ページ ２００３年１１月１８日 火曜日 午前９時５２分