Minolta PAGEWORKS 20 - Manual (Page 51)

3-1
Ch
ap
te
r 3
U
s
ing Y
our
Pr
inter
The control panel allows you to control most of the printing options.
If you use your software to control print jobs, you do not have to
change the control panel settings repeatedly. Any software setting
will override the control panel settings.
Use the control panel when:
•
Your software does not allow you to make the user selection.
•
You are making printer configuration changes which software
cannot control.
•
You need to identify the fonts available in the printer’s memory.
•
You need to print a test print.
•
You need to switch between on-line and off-line.
Basic Menu Setting Method
1. Press the On Line key to take the printer off-line.
2. Press the Menu key as many times as necessary to select the
menu group you want to set.
3. Press the Item key as many times as necessary to select the item
you want to set.
Pressing the
Menu key will return you to the menu mode.
4. Press the Select key as many times as necessary to change the
user selection.
Pressing the
Menu key will return you to the menu mode.
Pressing the Item key will return you to the item mode.
5. Press the Enter key to save your selection.
An asterisk (*) appears at the right of the setting.
6. Press the On Line key to return the printer on-line.
- The printer should be off-line to select the printer menus.
- Pressing the On Line key will return the printer on-line from any
menu mode.
- When a key operation is not performed for 30 seconds or more in
any menu mode, the printer will return on-line automatically.
1. Using the Control Panel
OperatW3.frm 1 ページ ２００３年１１月１８日 火曜日 午前９時５１分