Setting up a usb driver in windowsme, Setting up a usb driver in windows me – Motorola SBV5220 User Manual
Page 29
SBV5220 VoIP Cable Modem User Guide
20
Setting Up a USB Driver in Windows Me
1
Insert the SBV5220 VoIP Cable Modem CD-ROM in the CD-ROM drive. This CD contains the USB drivers
and must be inserted and read by the PC before you connect the Motorola VoIP cable modem to the PC.
2
Connect the Motorola VoIP cable modem to your computer with a USB cable. For further instructions, see
“Cabling and Startup for a Single User”
on page 10. A few seconds after you complete the USB connection,
the Add New Hardware Wizard window is displayed:
3
Click Next. Windows automatically searches for the correct USB drivers and installs them. If the installation is
successful, the following window is displayed. Otherwise, be sure the SBV5220 VoIP Cable Modem CD-ROM
is correctly inserted in your CD-ROM drive.
4
Click Finish to complete the installation.
When you finish setting up the USB driver, you can continue with
“Configuring TCP/IP in Windows 98, Windows
98 Second Edition, or Windows Me”
Although your Motorola VoIP cable modem model number may be different than in the images in this
guide, the procedure is the same.