Before you begin, Caution – Motorola SBV5220 User Manual
Page 14
SBV5220 VoIP Cable Modem User Guide
5
Before You Begin
Before you begin the installation, check that you received the following items with your VoIP cable modem:
You will need 75-ohm
to connect your VoIP cable modem to the nearest
cable outlet. If a TV is connected to the cable outlet, you may need a 5–900 MHz RF
and a total of three
coaxial cables to connect both the TV and the VoIP cable modem. The coaxial cable and RF splitter are available
at consumer electronics stores. To connect your VoIP cable modem to an Ethernet hub, see the network
description in
on page 35. Check the documentation provided with your hub.
Caution
Item
Description
Power
adapter or
cable
Connects to the AC power outlet
10/100Base-T
Ethernet
cable
port
USB cable
port
Phone wire
Connects the telephone to the cable system to provide telephone service
SBV5220
VoIP Cable
Modem
CD-ROM
Contains the User Guide and USB drivers
Battery
Provides standby power for your SBV5220 (one each). The SBV5220 has
the capability to accommodate two standby batteries. For additional standby
batteries, contact your service provider.
This product is for indoor use only. Do not route the USB, Ethernet, or telephone cables outside of the
building. Exposure of the cables to lightning could create a safety hazard and damage the product.