Motorola SBV5220 - Manual (Page 26)

Introduction Installation Troubleshooting Glossary License
SBV5220 VoIP Cable Modem User Guide 17
Setting Up a USB Driver in Windows 2000
1 Insert the SBV5220 VoIP Cable Modem CD-ROM in the CD-ROM drive. This CD contains the USB drivers
and must be inserted and read by the PC before you connect the Motorola VoIP cable modem to the PC.
2 Connect the Motorola VoIP cable modem to your computer with a USB cable. For further instructions, see
“Cabling and Startup for a Single User” on page 10. A few seconds after you complete the USB connection,
the Found New Hardware Wizard window is displayed:
3 Click Next. The following window is displayed:
Be sure “Search for a suitable driver for my device” is selected.
Although your Motorola VoIP cable modem model number may be different than in the images in this
guide, the procedure is the same.