Multi-Tech Systems 7500 - Manual (Page 331)

®
TECHNICAL NOTE
Telnet and HyperTerminal Access
This document describes how to access certain meter settings with Microsoft Telnet
or Windows HyperTerminal applications:
If your meter is connected to an Ethernet network, use a telnet application such
as Microsoft Telnet.
If your meter is connected serially or through a modem to your workstation, use
a terminal application such as Windows HyperTerminal.
In This Document
Using Telnet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 332
Telnet Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 333
Using HyperTerminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 334
Factory Terminal Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 335