Motorola 68P09396A92-A - Manual (Page 51)

BEFORE CALLING FOR SERVICE
Is the unit locked?
See Electronic Lock, page 37.
Is the NS (No Service) indicator lit?
See page 16.
Is a unique operating mode programmed?
Constant flashing of RM
(Roam) while in your home service area
may indicate that an incompatible System Type has been selected.
See System Type Selection, page 48.
Is the unit operating with non-standard settings?
If when you first turn the unit on,
o is displayed, you may have
inadvertently selected improper operating characteristics. See
Feature Status Review, page 34.
Have you selected the wrong home system?
If your unit is programmed for Two-System Operation, press ‰,
£
to display the active telephone number. See Two-System
Operation, page 21.
Have you charged the battery?
Place the unit in the charger and verify that the charger indicator
lamp is lit. If it does not light, check all wire connections and
remove and reseat the battery. See Preparing Battery for Initial Use,
page 12.
51
BEFORE CALLING FOR SER
VICE