Motorola 68P09396A92-A - Manual (Page 21)

BASIC OPERATION
T w o - S y s t e m O p e r a t i o n
Your telephone can operate over two different home systems if you
have made proper arrangements with your Cellular System
Operator. Both are designated as your “home system” but are
accessed with separate telephone numbers.
While you may switch from one system to the other, only one of
the two can be active at any given time. Calls are placed and
received through the active system only.
Switching to a Second Phone Number
1. Press ‰, £, Ø.
2. The display will blank to confirm the switch and the newly
activated number will appear.
3. When you have finished viewing, press Ç.
If you have two phone numbers programmed into your phone,
each time the telephone is turned on, it displays a message indi-
cating which System Type and phone number is currently active.
The message shows the System Type and phone number applied,
as follows:
System Type and Phone Number Display
Non-wireline type with phone number 1
Non-wireline type with phone number 2
Wireline type with phone number 1
Wireline type with phone number 2
If a call is placed to the inactive phone number, the caller will receive the
recorded “Not in Service” message.
I l l u m i n a t e d K e y p a d
Your keypad lights whenever the phone is turned on, or a call is
received. To help conserve battery power, the keypad lighting turns
off if no key is pressed. The display and keypad backlight remain lit
during menu use.
B2
B1
A2
A1
21