Motorola 68P09396A92-A - Manual (Page 23)

MEMORY
If you wish to save to that location, thus overwriting and erasing the
old information, press Ø.
If you wish to store the entry in an alternate location, press ´,
Ø
and the alternate location number.
C h a n g i n g E n t r i e s
1. Press ‰ and the two-digit location number so that the num-
ber to be changed is displayed.
2. Press and release Ç to back out each of the digits dis -
played.
3. Enter the new number.
4. Press Ø and the two-digit location. The location number
and
FULL will display. The display will then alternate
between the previously stored number and
CHANGE?.
5. Press Ø to save the new information to this location.
C l e a r i n g E n t r i e s
1. Press and hold Ç.
2. Press Ø.
3. Enter the two-digit location number to be cleared.
The display will alternate between the previously stored
number and
CHANGE?.
4. Press Ø to clear the memory location.
R e c a l l i n g F r o m M e m o r y
1. Press ‰.
2. Enter the two-digit location number (01, 02, etc.) The display
shows the location number, then the last 10 digits of its number.
3. Press ‰ to review the complete number.
M e m o r y S c r o l l i n g
Memory Scrolling allows you to review your memory locations
sequentially, beginning with the location of your choice. This is
23